TABLE OF CONTENTS
HOW TO SET TIME AND USE THE CROWN:
Your watch is fitted with a screw-down crown which must be unscrewed by turning anti-clockwise before setting time.
After use, push the crown into normal position then press and screw the crown back down: failure to screw the crown down will compromise water-resistance.
1 – Turn clockwise for manual winding
2 –Turn counterclockwise for date setting (if present)
3 – Seconds hand will stop, turn clockwise for time setting
Synchronise the seconds by pushing the crown back to position 2 to coincide with a given time signal.
HOW TO USE THE CASEBACK SCALE:
You can use the caseback scale to convert measures in miles, meters, yards, feet, inches.
The values on the connecting lines between units are the numbers of time the smaller unit fits into the larger one. Units are displayed in counter-clockwise order from large to small.
[ MI > M > YD > FT > IN ]
With the caseback scale you can convert any measure simply multiplying or dividing the distance by the number shown between the units.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article