TABLE OF CONTENTS
- HOW TO SET TIME AND USE THE CROWN (MOVEMENT SW200-1)
- HOW TO SET TIME AND USE THE CROWN (MOVEMENT SW200-1 B)
HOW TO SET TIME AND USE THE CROWN (MOVEMENT SW200-1):
Your watch is fitted with a screw-down crown, which must be unscrewed by turning anti-clockwise before setting time.
After use, push the crown into normal position then press and screw the crown back down: failure to screw the crown down will compromise water-resistance.
1 – Turn clockwise for manual winding
2 – Turn clockwise for date setting (if present)
3 – Seconds hand will stop, turn counterclockwise for time setting
Synchronise the seconds by pushing the crown back to position 2 to coincide with a given time signal.
HOW TO SET TIME AND USE THE CROWN (MOVEMENT SW200-1 B):
Your watch is fitted with a screw-down crown, which must be unscrewed by turning anti-clockwise before setting time.
This particular movement has no data disk therefore the crown will only have 2 steps when pulled out as shown in the picture above.
After use, push the crown into normal position then press and screw the crown back down: failure to screw the crown down will compromise water-resistance.
1 – Turn clockwise for manual winding
2 – Seconds hand will stop, turn counterclockwise for time setting
Synchronise the seconds by pushing the crown back to position 2 to coincide with a given time signal.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article